Vid: Chemmy King going 8.84

Post by **RaceJunkie** » Sat Nov 18, 2006 11:21 am

Another vid recorded by me...

This is a vid of one of Aruba's Fastest Import....
Here it is going it's personal best of 8.84...

Enjoy..

Click Here

:drivin:

MenaceIIsociety · Post by **MenaceIIsociety** » Sat Nov 18, 2006 10:01 pm

I gots a question my fengs are they racing 3T engine? Or it's French Pass still racing a 3T engine?

Chai · Post by **Chai** » Sun Nov 19, 2006 12:43 pm

MenaceIIsociety wrote:Mi tin un pregunta nan ta koriendo cu 3T? of ta Franse pas ta coriendo 3T ahinda?

Menace, this is the English only section. Can you please translate your post

GinoX · Post by **GinoX** » Mon Nov 20, 2006 7:27 am

I thought that only the French Pass Connection racing team is still playing with the venerable 3T. All the others in the single digits have gone over to the 3S-GTE and the 2/3RZ engines.... But then, this is my assumption.

Chui · Post by **Chui** » Mon Nov 20, 2006 12:05 pm

Yeah French pass still uses the 3T . I respect that little engine it made 500 at the wheels with turbo only .The 3T head flows stock around 120cfm :puke:

The head is ported with huge stainless valves and the heads only flow like 185 cfm (full ported with competetion 3 angle valvejob ) . The 3s stock flows about 235cfm stock and with just porting without a valvejob they flow around 255 cfm with stock valve . With oversize valve and a competetion valvejob it should flow around 270 cfm . What does this tell me ? That with the boost they are running now if they just put a 3S with ported heads and good rods and pistons that beast should run low low 8s easy :cmplimnt:

. Or even high 7s .
Chui

Boostedsup · Post by **Boostedsup** » Mon Nov 20, 2006 12:42 pm

Man Great Vid, It's Only Missing The Full Burn Out.

Import Class Is Becoming What It Should Be, Looking At The Et"s We Can Compete With Any Other Country In This Class.

Great Boys Keep Up The Good Work

Ladcho · Post by **Ladcho** » Mon Nov 20, 2006 5:52 pm

Nice really nice pass and time...by CHEMMY KING..

so the T3 Toyota Engine is still very powerfull.And still in use by some Racers.
Me, mi thoughts where that most peolpe do not use this engines anymore to drag race in Aruba..but the bigger ,electronic/fuel-injected engines..
so it's nice to hear that this engines will be around for a very long long time to come..and bringing some crazy low times at the track..

And thank you again Marv for posting the Vid..

Roeljamil · Post by **Roeljamil** » Mon Nov 20, 2006 6:14 pm

haha Ladcho .. Chemmy King uses the Toyota 3SGTE motor

Ladcho · Post by **Ladcho** » Mon Nov 20, 2006 6:18 pm

Roeljamil wrote:haha Ladcho .. Chemmy King uses the Toyota 3SGTE motor

Roel i was talking in general about the 3T Engine

And this is the english only section..always look above @ the Tread Header.

RaceJunkies.com

RaceJunkies.com

Vid: Chemmy King going 8.84

Vid: Chemmy King going 8.84